BM65 monodirectional articulated tractor

This is Agrimac’s flagship tractor; the evolution of the classic a9070 with an engine update to Stage V. It maintains continuity in size, minimum costs in maintenance and consumption; and above all reliability.

The BM series of isodiametric articulated tractors is a renovation of the classic Agrimac 9000 series. The BM models, while retaining the durability and strength of the 9000, have even more work capacity. The big change is in the engine.

Thus, the BM65 model represents a continuation of the design and performance of the a9070 model. The difference is that the BM65 is equipped with a Perkins engine that provides 45 kW. With this power it reaches up to 222 Nm. The ratio between power and torque gives a measure of the efficiency and performance of the engine. In addition, it is certified for stage V emissions. The technological trend of reducing pollution and consumption goes hand in hand with the BM65 tractor. The consequence is high performance at minimal expense.

The power it develops is transmitted with formidable efficiency to the ground thanks to the joint work of the four equally sized drive wheels. This model, like the a9070, is outstanding in terms of ground traction and pulling force. However, the BM65 clearly outperforms its predecessor by reducing consumption.

As far as its components are concerned, the BMs follow the line of quality, simplicity and accessibility of the 9000 series. Maximum quality in the components that guarantee a long useful life for the vehicle and at the same time few maintenance interventions. And when necessary, the operator himself can change the oil, belts, lubrication, etc. because everything is laid out to facilitate this.

As for the technical aspects, it is worth highlighting the twenty-four-speed synchronized gearbox and the 2,300 kilos of lifting capacity of the rear linkage.

This tractor is designed to be the key tool for intensive use on any farm, adapting to all types of tasks, implements, environments and terrain. It is a very rugged and versatile machine. As if that were not enough, it drives very easily and provides a sense of security that is no coincidence. The continuity of this design over decades in different versions is the best proof of its virtues.

  • General:

    • Maximum permissible laden weight: 2,600 kg
    • Unladen weight: 1,600 kg
  • Engine:

    • Manufacturer / Model: Perkins / 404J-E22T
    • Power: 45 kW / 60.75 HP
    • Torque: 222 Nm @ 1,600 rpm
    • Cubic Capacity: 2,200 cm³
    • Number of cylinders / valves: 4 /
    • Revolutions per minute: Max. 2,800 rpm
    • Emissions stage: Stage V
    • Alternator: 12 V -85 A
    • Cooling / Air filter: Liquid / Dry
  • Driving:

    • Gearing: Synchronized: 24 (12 Forward + 12 Reverse)
    • Reverse drive: 12 reverse gears
    • Top speed: From 1.6 to 40 Km/h
    • Steering: Hydraulics • Double-acting steering cylinder.
    • Traction: 4×4
    • Brakes
      • Servo: Hydraulically-driven disc mounted on the rear axle reduction gear.
      • Parking: Drum, manual mechanical operation, mounted on the front axle reduction gear.
      • As it is fitted with totally independent systems, it can act as an emergency brake.
    • Transmission
      • Clutch
        • Dry single disc
        • Diameter of disc: 250 mm.
      • Differential
        • Front and rear differential with simultaneous locking
        • Mechanical drive via single pedal
        • Automatic unlocking
      • Power take-off
        • Two rear power take-off shafts.
        • Lower shaft independent of the gears, standardised Ø 35- 6 grooves and turns at 540-750-1000 and 1500 r.p.m.
        • Upper shaft synchronised with all the gears, for driven trailer.
  • Hydraulic Systems

    • Hydraulic circuit:
      • Gear pump with flow of 32 l/minute and preferential outlet for the hydraulic steering.
      • 180 bar of pressure for lift and auxiliaries, 90 bar for the steering.
      • 18-litre hydraulic tank.
    • Rear-mounted hydraulic lift
      • 2 cylinders. Three-point Cat 1N (narrow tractors) and optional Cat 1.
      • Lifting capacity of 2,300 Kg
  • Standard accessories:

    • Battery: 12 V– 85 Ah
    • Tow bar: Yes
    • Driving position: Height- and length-adjustable seat with suspension and cushioning.
  • Optional equipment:

    • Tyres:
      • 11.2R20 / 11.50/80-15.3 / 280/70R20 / 300/70R20 • 320 / 70R20