a9100 Articulated Tractor

The top of the range and the most powerful of Agrimac’s articulated tractors. Equipped with the highest quality parts.

The a9100 articulated tractor is the best of its kind, namely articulated vehicles with equal-sized wheels, also known as isodiametric articulated tractors. This one is fitted with a four-cylinder turbocharged Deutz engine producing 78.2 horsepower.

It is manufactured using the finest parts on the market. It is worth highlighting some of its features starting with the twenty-four speed synchronised gearbox: twelve forward and twelve reverse with synchronised reverse drive. Its top speed of 40 kilometres per hour are also highly appreciated when travelling from job to job, long roads and farm tracks. The front and rear wheel dual transfer is fundamental when pulling heavy loads.

The a9100’s work capacity is excellent. The two cylinders of the rear-mounted lift can lift 2,300 kilos. It has a multitude of power take-offs, distributors and outputs. It is compatible with all types of implements and tools to always provide a fantastic performance.

Its robust structure and the quality of its materials greatly extend the working life of the tractor and significantly bring down its maintenance costs which are already low as its in comparison with other tractors with the same features.

The driving experience is unbeatable; firstly, due to the feeling of safety, which is so much more than just a feeling, but a reality derived from specific top-quality devices such as the hydraulically powered independent front and rear brakes or the fully hydraulic steering. Secondly, there is the comfort provided by the anti-vibration system, the smooth steering and the driver’s seat which adjusts its cushioning to the weight of the driver. Furthermore, the seat can not only be adjusted according to height, but can also be moved forwards and backwards.

The a9100 tractor is a top-of-the-range machine that is worthy of that name, an investment for the future and a profitable tool. Don’t forget to check out its technical specifications below.

  • Engine:

    • DEUTZ: TD2011L04 turbocharged. 4-cylinder, 3,619 cc
    • Fully integrated air/oil cooling
  • Power:

    • 57,6 HP / 78,2 CV
  • Cooling: 

    • air/oil
  • Fuel tank:

    • 36 L
  • Clutch:

    • 10-Inch dry single disc.
  • Transmission:

    • Synchronised gearbox.
    • 24 speeds (12 forward + 12 reverse) with synchronised reverse drive.
  • Speed:

    • From 1.6 to 40 Km/h.
  • Differential:

    • Dual wheel transfer.
    • Front and rear with simultaneous single-pedal locking.
    • Automatic unlocking
  • Power take-off::

    • Two rear power take-off shafts.
    • Independent lower shaft, Ø 35 standardised 6-groove that turns at 540-540E-1000 RPM.
    • Upper shaft synchronized with all the gears.
  • Steering:

    • Integral hydraulic.
    • Two dual-effect cylinders and independent circuit
  • Hydraulic circuit:

    • Double-body gear pump with independent circuit for lifting and steering. Maximum flow rate of 30 l/min for lifting and ancillary services and 22.5 l/min for steering.
    • Working pressure of 150 bar for lifting and auxiliary take-offs. 90 bar for steering.
    • 18-litre hydraulic oil tank.
  • Brakes: 

    • Rear and front, independent of each other, that change down before acting on the wheels.
    • Servo: Hydraulically-driven external disc on rear axle.
    • Parking brake: Drum, manual mechanical operation, on front axle. Can also be used as an emergency brake.
  • Hydraulic take offs:

    • Standard equipment, fitted with 6 auxiliary hydraulic take-offs with “1/2-inch push-pull” type connections, with the following services:
      Two dual-effect distributors with 4 outlets

      • One single-effect distributor with interlocks
      • One outlet
      • Free return to tank
      • One outlet.
  • Lift:

    • Rear-mounted lift, with 2 external cylinders, lifting capacity of 2,300 kg.
      • 1N-category three-point (150 730 II) for narrow tractors
      • Options: Adjustable three-point for category 1N and Cat. 1
      • Automatic coupling
  • Driving position:

    • Seat with suspension and cushioning that adjusts to the driver´s weight, height and length.
    • Vertical and horizontal adjustable.
  • Wheels:

    • Can be fitted with the following sets of wheels:
      11.5/80-15.3 • 9.50-20 • 11.2R20 • 300/70R20 and 320/70 R20.
  • Unladen weight:

    • 1,750 kg
    • Maximum permissible laden weight: 3,100 kg