a9080 Articulated Tractor

Its65 horsepower lead to a lifting capacity of 2,300 kilos and a top speed of 40 km/h. Ideal for those who value driver cab comfort.

The a9080 articulated tractor is an isodiametric model, in other words fitted with equal wheels, which can be of several measurements, with a four-cylinder Deutz engine that provides 65 HP.

It is an exceptional machine, due to its performance and power, the quality of its parts, safety and comfortable working. As is the case with the other machines in the series, namely the a9070 and the a9100, it is fitted with the strongest cast steel gearbox on the market.

The gearbox is synchronised across its twenty-four speeds: twelve forward and a further twelve reverse with synchronised reverse drive. It has a top speed of forty kilometres per hour.

The experience of driving and working with the machine is more than satisfactory for many reasons: firstly, due to its work capacity in general and its compatibility with a multitude of implements in particular. The rear-mounted lift has two cylinders capable of lifting 2,300 kilos. It has an outstanding pulling and towing capacity. It is extremely versatile and very comfortable.

Regarding this aspect, it is worth highlighting that the suspension and cushioning of the seat can be adjusted in accordance with the driver’s weight and, of course, the height of the seat can also be adjusted and it can be moved backwards and forwards.

The a9080 tractor is assembled using parts of the highest quality which result in the excellent performance and long working life of the machine, as well as reduced maintenance costs. Regarding the last point, it is worth highlighting that it is the accessibility of the consumables that enable the user to change filters, fluids, etc. him-herself, thereby saving visits to the repair shop.

Discontinued
Only avalaible outside of the UE
User manual

  • Engine:

    • DEUTZ: D2011L04. 3,619 cc 4 cylinders.
    • Fully integrated air/oil cooling

  • Power:

    • 47,5 KW / 65 HP

  • Cooling: 

    • air/oil

  • Fuel tank:

    • 36 litres

  • Clutch:

    • 10-Inch dry single disc.

  • Transmission:

    • Synchronised gearbox.
    • 24 speeds (12 forward + 12 reverse) with synchronised reverse drive.

  • Speed:

    • From 1.6 to 40 Km/h.

  • Differential:

    • Dual wheel transfer.
    • Front and rear with simultaneous single-pedal locking.
    • Automatic unlocking

  • Power take-off:

    • Two rear power take-off shafts.
    • Independent lower shaft, Ø 35 standardised 6-groove that turns at 540-540E-1000 RPM.
    • Upper shaft synchronised with all the gears.

  • Steering:

    • Integral hydraulic.
    • Two dual-effect cylinders and independent circuit

  • Hydraulic circuit::

    • Double-body gear pump with independent circuit for lifting and steering. Maximum flow rate of 30 l/min for lifting and ancillary services and 22.5 l/min for steering.
    • Working pressure of 150 bar for lifting and auxiliary take-offs. 90 bar for steering.
    • 18-litre hydraulic oil tank.

  • Brakes: 

    • Rear and front, independent of each other, that change down before acting on the wheels.
    • Servo: Hydraulically driven external disc on rear axle.
    • Parking brake: Drum, manual mechanical operation, on front axle. It can be used as an emergency brake.

  • Hydraulic take offs:

    • Standard equipment, fitted with 6 auxiliary hydraulic take-offs with “1/2-inch push-pull” type connections, with the following services:
      Two dual-effect distributors with 4 outlets

      • One single-effect distributor with interlocks
      • One outlet
      • Free return to tank
      • One outlet.

  • Lift:

    • Rear-mounted lift, with 2 external cylinders, lifting capacity of 2,300 kg.
      • 1N-category three-point (150 730 II) for narrow tractors
      • Options: Adjustable three-point for category 1N and Cat. 1
      • Automatic coupling

  • Driving position:

    • Seat with suspension and cushioning that adjusts to the driver’s weight.
    • Height and length adjustable.

  • Wheels:

    • Can be fitted with the following sets of wheels:
      11.5/80-15.3 • 9.50-20 • 11.2R20 • 300/70R20 and 320/70 R20.

  • Unladen weight: 

    • 1,735 kg
    • Maximum permissible laden weight: 3,100 kg