a9070 Articulated Tractor

60.3 horsepower Perkins engine, 24 speeds and double-acting steering cylinder

The a9070 articulated tractor is an isodiametric model, in other words, all its wheels are the same size. It is compatible with several sets of wheels, the details of which are provided in the technical specifications. It is fitted with a four-cylinder turbocharged Perkins engine capable of generating 60.30 HP.

This is a truly powerful, hard-working machine, and it is robust, not only structurally, but also part-wise, and this is what guarantees the durability that users of Agrimac tractors find so appealing.

The gearbox is synchronised to the twenty-four speeds: twelve forward and a further twelve reverse with synchronised reverse drive. It is able to lift 2,300 kilos, meaning it can be attached to any implement.

The a9070 is a real pleasure to drive, not only because of the height- and length- adjustable seat with its suspension and cushioning, but also due to the smoothness of the steering, which has an independent hydraulic circuit and double-acting steering cylinder. In addition to this, there is the feeling of safety that is so much more than just a feeling; the hydraulic disc braking system with independent servo and parking brakes convert feeling into reality.

It’s well worth taking a moment to check out the details of this magnificent tractor in the specifications shown below to see just what it is that makes the a9070 such a recommendable machine.

  • Engine:

    • Perkins 404 D – 22T, 4-cylinder, turbocharged, 2,216 cc.
    • Dry oil filter with safety cartridge and saturation indicator
  • Power:

    • 44,4 KW / 60,3 HP
  • Cooling: 

    • Water
  • Fuel tank:

    • 36 litres
  • Clutch:

    • Dry single disc. Diameter of disc: 250 mm.
  • Transmission:

    • Synchronised gearbox
    • 24 speeds (12 forward + 12 reverse) with synchronised reverse drive.
  • Speed:

    • From 1.6 to 40 Km/h.
  • Differential:

    • Front and rear differential with simultaneous locking
    • Mechanical drive via single pedal
    • Automatic unlocking
  • Power take-off:

    • Two rear power take-off shafts.
    • Lower shaft independent of the gears, standardised Ø 35- 6 grooves and turns at 540-750-1000 and 1500 r.p.m.
    • Upper shaft synchronised with all the gears, for driven trailer.
  • Steering:

    • Fully hydraulic with independent hydraulic circuit.
    • Double-acting steering cylinder.
  • Brakes: 

    • Servo: Hydraulically driven disc mounted on the rear axle reduction gear.
    • Parking: Drum, manual mechanical operation, mounted on the front axle reduction gear.
    • As it is fitted with totally independent systems, it can act as an emergency brake.
  • Hydraulic circuit:

    • Gear pump with flow of 32 l/minute and preferential outlet for the hydraulic steering.
    • 180 bar of pressure for lift and auxiliaries, 90 bar for the steering.
    • 18-litre hydraulic tank.
  • Lift:

    • Rear lift with 2 cylinders. Three-point Cat 1N (narrow tractors) and optional Cat 1.
    • Lifting capacity of 2,300 Kg
  • Driving position:

    • Height- and length- adjustable seat with suspension and cushioning.
  • Wheels:

    • It can be fitted with the following sets of wheels:
      11.2R20 / 11.50/80-15.3 / 280/70R20 / 300/70R20 • 320 / 70R20
  • Unladen weight: 

    • 1,600 Kg